When you’re looking for a broadcast spreader it’s hard to choose because there are so many on the market. You might know that you want a broadcast spreader but you still need to narrow it down a bit. If you need a large capacity spreader for a large garden that can cut down your search and if you have a tractor then you can consider a tow-behind spreader. The Brinly BS36BH Tow Behind Broadcast Spreader, 175-Pound can cover a large area and fits behind most garden tractors. We’ve had a look at what we think are 11 good reasons for you to consider this garden spreader so you can see if it’s suitable for your situation.
If you landed here by mistake and are just looking to buy the Brinly BS36BH click here to go straight through to the product page on Amazon.com
- 1 #1. Extra-large 175 pound capacity
- 2 #2. Universal tow-behind hitch
- 3 #3. Can spread any granular product
- 4 #4. Easy to assemble
- 5 #5. Easy to calibrate
- 6 #6. Rust proof
- 7 #7. Directional Spread Pattern Control
- 8 #8. Easy to reach controls
- 9 #9. 25 inch wheel base
- 10 #10. 8-12 inch spread
- 11 #11. Made in the USA, 2 year warranty
- 12 Conclusion
#1. Extra-large 175 pound capacity
The Brinly BS36BH has a large capacity of 175 pounds of product and can cover an area of 1 acre or larger. This is ideal for home owners or even people who want to use for light commercial use. The hopper is built with a deep shape so you don’t have as much surface area for the wind to pick up any product when you are moving and gravity also helps keep the product moving downwards. There is a cover available from the Brinly company which is part number 1009191. This can help if you’re working in damp or windy conditions.
#2. Universal tow-behind hitch
This broadcast spreader is meant to be attached to a garden tractor and it comes with a universal tow-behind hitch attachment. It has a single pin hook up which means that you can attach it quickly and securely.
#3. Can spread any granular product
When choosing a broadcast spreader you want the versatility of being able to spread different products. The Brinly BS36BH Tow Behind Broadcast Spreader is great for spreading grass seed, fertilizer, even ice melt and salt to name but a few. As long as the product is granular and dry there is a good chance you can spread it with this spreader.
#4. Easy to assemble
This tow-behind spreader has to be assembled before you can use it. It’s relatively straight forward and there is a youtube video to explain it step by step. The parts and nuts and bolts are all numbered to make it easy to use the right bits and the nuts and bolts are shrink wrapped onto card in the order you will need them which is also very helpful.
#5. Easy to calibrate
Once you have your garden spreader assembled it is easy to adjust the plate underneath to calibrate it correctly. It is shown in the youtube video above but the gist of it is that you attach the flow control without tightening it, push the plate fully closed then tighten and it will then be ready for use with the correct settings.
#6. Rust proof
This Brinly BS36BH Tow Behind Broadcast Spreader is built of durable polyethylene so it can stand up to continued use of corrosive fertilizers and still be easy to clean out. It has a fully enclosed gearbox to prevent rust and corrosion and they use stainless steel hardware too.
#7. Directional Spread Pattern Control
When you are spreading with different products the density of the product can affect the balance of the distribution. If when you start spreading you find it spreads more to one side rather than evenly you have a slide plate under the hopper that you can adjust. Move the directional plate to one side or the other depending what’s required to balance the spread. This directional plate is also used to shut off either side if you want to protect borders while spreading your products.
#8. Easy to reach controls
This Brinly spreader is made with a lever control which should be easy to reach from the back of your garden tractor. The flow rate is set with by moving the handle stop to the number required and tightening the knob to keep it in place. This will only open up the flow plate to the correct amount dictated by the product.
#9. 25 inch wheel base
With any type of trailer you want it to be stable when it travels over the ground and able to deal with some uneven ground. The wheel base on this spreader is 25 inches and the wheels which are pneumatic are 13 inches in diameter and 5 inches wide so it can move smoothly over ground while coping with the heavy loads.
#10. 8-12 inch spread
The standard spread on this Brinly BS36BH Tow Behind Broadcast Spreader is 8-12 inches depending on the speed that you’re moving over the ground. The recommended speed is 3 mph so that you don’t strip the gears. The spreader is installed with glass-filled nylon gears. The gears have a high-speed 6:1 ratio providing some of the widest spread patterns available.
#11. Made in the USA, 2 year warranty
We all want to support home grown businesses and what better way than to buy a product that is made fully in the USA. The Brinly-Hardy Company is situated in Jeffersonville, Indiana. You also get a 2 year warranty on the covers the steel frame parts, the poly hopper, the transmission and the flow control parts. The other parts, the tires, wheels and agitator are only covered for 90 days. Make sure you register your purchase to be covered.
We think that you can’t go wrong with the Brinly BS36BH Tow Behind Broadcast Spreader, 175-Pound, it’s well built, can fit on most garden tractors and can be adjusted so you don’t spread on your neighbours property. Why not check it out for yourself.